[1] Wang M J,Carmona E,Gupta A,et al.Enabling “lithium-free” manufacturing of pure lithium metal solid-state batteries through in situ plating[J].Nature Communications,2020,11(1):5201-5201.
[2] Wang H,Liu M,Wang X,et al.A self-smoothing Li-metal anode enabledviaa hybrid interface film[J].Journal of Materials Chemistry A,2020,8(24):12045-12054.
[3] Subburaj T,Brevet W,Farmakis F,et al.Silicon/LiNi_0.8Co_0.15Al_0.05O₂ lithium-ion pouch cells charging and discharging at-40 degrees C temperature[J].Electrochimica Acta,2020,354.
[4] Yang Z,Li Z,Huang Y,et al.Artificial interface stabilized LiNi_0.80Co_0.15Al_0.05O₂@Polysiloxane cathode for stable cycling lithium-ion batteries[J].Journal of Power Sources,2020,471:228480.
[5] He H,Dong J,Zhang D,et al.Effect of Nb doping on the behavior of NCA cathode:enhanced electrochemical performances from improved lattice stability towards 4.5V application[J].Ceramics International,2020,46(15):24564-24574.
[6] Wang L,Maxisch T,Ceder G,A First-principles approach to studying the thermal stability of oxide cathode materials[J].Chemistry of Materials,2007,19(3):543-552.
[7] Dixit M,Markovsky B,Schipper F,et al.Origin of structural degradation during cycling and low thermal stability of Ni-rich layered transition metal-based electrode materials[J].The Journal of Physical Chemistry C,2017,121(41):22628-22636.
[8] Ryu H H,Park K J,Yoon C S,et al.Capacity fading of Ni-rich Li[Ni_xCo_yMn_1-x-y]O₂(0.6≤x≤0.95) cathodes for high-energy-density lithium-ion batteries:bulk or surface degradation？[J].Chemistry of Materials,2018,30(3):1155-1163.
[9] Oh P,Song B,Li W,et al.Overcoming the chemical instability on exposure to air of Ni-rich layered oxide cathodes by coating with spinel LiMn_1.9Al_0.1O₄[J].Journal of Materials Chemistry A,2016,4(16):5839-5841.
[10] Hatsukade T,Schiele A,Hartmann P,et al.Origin of carbon dioxide evolved during cycling of Nickel-rich layered NCM cathodes[J].ACS Applied Materials & Interfaces,2018,10(245):38892-38899.
[11] Matsumoto K,Kuzuo R,Takeya K,et al.Effects of CO₂ in air on Li deintercalation from LiNi_1-x-yCo_xAl_yO₂[J].Journal of Power Sources,1999,81-82:558-561.
[12] Wang Y,Jiang J,Dahn J R.The reactivity of delithiated Li(Ni_1/3Co_1/3Mn_1/3)O₂,Li(Ni_0.8Co_0.15Al_0.05)O₂ or LiCoO₂ with non-aqueous electrolyte[J].Electrochemistry Communications,2007,9(10):2534-2540.
[13] Kondrakov A O,Schmidt A,Xu J,et al.Anisotropic lattice strain and mechanical degradation of high- and low-nickel NCM cathode materials for Li-ion batteries[J].The Journal of Physical Chemistry C,2017,121(6):3286-3294.
[14] Lim J M,Hwang T,Kim D,et al.Intrinsic origins of crack generation in Ni-rich LiNi_0.8Co_0.1Mn_0.1O₂ layered oxide cathode material[J].Scientific Reports,2017,7(1):39669.
[15] Kim J,Lee H,Cha H,et al.Prospect and reality of Ni-rich cathode for commercialization[J].Advanced Energy Materials,2018,8(6):1702028.
[16] Cho Y,Cho J.Significant improvement of LiNi_0.8Co_0.15Al_0.05O₂ cathodes at 60 degrees C by SiO₂ dry coating for Li-ion batteries[J].Journal of Electrochemical Society,2010,157(6):A625-A629.
[17] Dai G,Yu M,Shen F,et al.Improved cycling performance of LiNi_0.8Co_0.15Al_0.05O₂/Al₂O₃ with core-shell structure synthesized by a heterogeneous nucleation-and-growth process[J].Ionics,2016,22(12):2021-2026.
[18] Liu W,Tang X,Qin M,et al.FeF₃-coated LiNi_0.8Co_0.15Al_0.05O₂ cathode materials with improved electrochemical properties[J].Materials Letter,2016,185:96-99.
[19] Lee D J,Scrosati B,Sun Y K.Ni₃(PO₄)₂-coated Li[Ni_0.8Co_0.15Al_0.05]O₂ lithium battery electrode with improved cycling performance at 55°C[J].Journal of Power Sources,2011,196(18):7742-7746.
[20] Song H G,Kim J Y,Kim K T,et al.Enhanced electrochemical properties of Li(Ni_0.4Co_0.3Mn_0.3)O₂ cathode by surface modification using Li₃PO₄-based materials[J].Journal of Power Sources,2011,196(16):6847-6855.
[21] Zhu J,Li Y,Xue L,et al.Enhanced electrochemical performance of Li₃PO₄ modified Li[Ni_0.8Co_0.1Mn_0.1]O₂ cathode material via lithium-reactive coating[J].Journal of Alloys and Compounds,2019,773:112-120.
[22] Wang M,Zhang R,Gong Y,et al.Improved electrochemical performance of the LiNi_0.8Co_0.1Mn_0.1O₂ material with lithium-ion conductor coating for lithium-ion batteries[J].Solid State Ionics,2017,312:53-60.
[23] Zhang X,Liu G,Li S,et al.Preparation of a homogeneous Li₃PO₄ coating and its effect on the electrochemical properties of LiNi_0.8Co_0.15Al_0.05O₂[J].The Journal of Electronic Materials,2019,48(7):4443-4451.
[24] Du K,Xie H,Hu G,et al.Enhancing the thermal and upper voltage performance of Ni-rich cathode material by a homogeneous and facile coating method:spray-drying coating with nano-Al₂O₃[J].ACS Applied Materials & Interfaces,2016,8(7):17713-17720.
[25] Xiao Z,Hu C,Song L,et al.Modification research of LiAlO₂-coated LiNi_0.8Co_0.1Mn_0.1O₂ as a cathode material for lithium-ion battery[J].Ionics,2018,24(1):91-98.
[26] Li L,Xu M,Yao Q,et al.Alleviating durface degradation of nickel-rich layered oxide cathode material by encapsulating with nanoscale Li-ions/electrons superionic conductors hybrid membrane for advanced Li-ion batteries[J].ACS Applied Materials & Interfaces,2016,8(45):30879-30889.
[27] He X,Xu X,Wang L,et al.Enhanced electrochemical performance of LiNi_0.8Co_0.15Al_0.05O₂ cathode material via Li₂TiO₃ nanoparticles coating[J].Journal of Electrochemical Society,2019,166(2):A143-A150.
[28] Her L J,Hong J L,Chang C C.Preparation and electrochemical characterizations of poly(3,4-dioxyethylenethiophene)/LiCoO₂ composite cathode in lithium-ion battery[J].Journal of Power Sources,2006,157(1):457-463.
[29] Ju S H,Kang I S,Lee Y S,et al.Improvement of the cycling performance of LiNi_0.6Co_0.2Mn_0.2O₂ cathode active materials by a dual-conductive polymer coating[J].ACS Applied Materials & Interfaces,2014,6(4):2546-2552.
[30] Xie H M,Wang R S,Ying J R,et al.Optimized LiFePO₄-polyacene cathode material for lithium-ion batteries.Advanced Materials,2006,18(19):2609-2613.
[31] Wang D,Wang X,Yang X,et al.Polyaniline modification and performance enhancement of lithium-rich cathode material based on layered-spinel hybrid structure[J].Journal of Power Sources,2015,293:89-94.
[32] He X,Han G,Lou S,et al.Improved electrochemical performance of LiNi_0.8Co_0.15Al_0.05O₂ cathode material by coating of graphene nanodots[J].Journal of Electrochemical Society,2019,166(6):A1038-A1044.
[33] Yu J,Li H,Zhang G,et al.Carbon nanotubes coating on LiNi_0.8Co_0.15Al_0.05O₂ as cathode materials for lithium battery[J].International Journal of Electrochemical Science,2017,12(12):11892-11903.
[34] Xie H,Du K,Hu G,et al.The role of sodium in LiNi_0.8Co_0.15Al_0.05O₂ cathode material and its electrochemical behaviors[J].The Journal of Physical Chemistry C,2016,120(6):3235-3241.
[35] Zhao J,Wang Z,Wang J,et al.Anchoring K⁺ in Li⁺ sites of LiNi_0.8Co_0.15Al_0.05O₂ cathode material to suppress its structural degradation during high-voltage cycling[J].Energy Technology,2018,6(12):2358-2366.
[36] Dong J,Xiao P,Zhang D,et al.Enhanced rate performance and cycle stability of LiNi_0.8Co_0.15Al_0.05O₂ via Rb doping[J].Journal of Materials Science:Materials in Electronics,2018,29(24):21119-21129.
[37] Huang B,Li X,Wang Z,et al.Synthesis of Mg-doped LiNi_0.8Co_0.15Al_0.05O₂ oxide and its electrochemical behavior in high-voltage lithium-ion batteries[J].Ceramics International,2014,40(8):13223-13230.
[38] Du F,Chen R,Zhuang Y,et al.Effect of substitution of cobalt with iron on electrochemical behavior and solid electrolyte interface of LiNi_0.8Co_0.15Al_0.05O₂[J].Applied Surface Science,2019,484:374-382.
[39] Yoo G W,Park T J,Son J T.Effect of structural and electrochemical properties of Yttrium-doped LiNi_0.90Co_0.05Al_0.05O₂ electrode by co-precipitation for lithium ion-batteries[J].Journal of New Materials for Electrochemical Systems,2015,18(1):9-16.
[40] Wan D Y,Fan Z Y,Dong Y X,et al.Effect of metal(Mn,Ti) doping on NCA cathode materials for Lithium ion batteries[J].Journal of Nanomaterials,2018,2018:8082502.
[41] Lee M J,Noh M,Park M H,et al.The role of nanoscale-range vanadium treatment in LiNi_0.8Co_0.15Al_0.05O₂ cathode materials for Li-ion batteries at elevated temperatures[J].Journal of Materials Chemistry A,2015,3(25):13453-13460.
[42] Li X,Xie Z,Liu W,et al.Effects of fluorine doping on structure,surface chemistry,and electrochemical performance of LiNi_0.8Co_0.15Al_0.05O₂[J].Electrochimica Acta,2015,174:1122-1130.
[43] He S,Wei A,Li W,et al.An in-depth analysis detailing the structural and electrochemical properties within Br^- modified LiNi_0.815Co_0.15Al_0.035O₂(NCA) cathode material[J].Electrochimica Acta,2019,318:362-373.